A good movable partition wall not only requires good materials before installation and good technology during installation, but also good maintenance after installation to extend the service life of the wall. The maintenance cost and lifespan of the panel directly affect the full life cycle cost of the space. The following practical suggestions will help you extend the service life of the panel:
1. Daily maintenance-details determine lifespan
General maintenance: regularly clean the track with a vacuum cleaner to avoid dust accumulation affecting the smoothness of pushing and pulling; avoid hard objects hitting the edge of the panel to prevent the sealing strip from falling off or the panel from deforming.
Special material maintenance: wooden panels need to be coated with wood wax oil every six months to prevent cracking and stay away from direct sunlight; metal panels should be wiped with a neutral detergent to avoid contact with acidic substances and oxidation.
2. Lifespan comparison - material determines cost
Metal (aluminum alloy) has an expected lifespan of 15-20 years, low maintenance frequency, and moderate long-term cost;
Glass (tempered) has an expected lifespan of 10-15 years, medium maintenance frequency, and high long-term cost;
Wood (solid wood composite) has an expected lifespan of 8-12 years, high maintenance frequency, and low long-term cost;
Fabric/soft package has an expected lifespan of 5-8 years, high maintenance frequency, and low long-term cost.
3. Renovation and upgrade - space sustainability
Panel replacement: The track system is compatible with a variety of panels, and the material or design can be upgraded at a low cost later;
Surface treatment: Metal panels can be repainted, and wooden panels can be veneered to extend their service life.
Note that the wall should not be touched by sharp objects during use, so as to avoid scratches, grooves, etc. on its surface, affecting its appearance. In particular, high-temperature objects should not be allowed to touch the panels of movable partition fabrics or soft packages, so as to avoid burning the surface material.
